: Thermal overload protection, short circuit protection, and reverse polarity protection. Insulation : Double insulated (no earthing required). Critical Safety Tips Never leave unattended : Because the
A: Absolutely. The BX60 automatically switches to float/maintenance mode. It will not overcharge.
: Once the needle stays constant on the left side, your battery is at its optimum level. Note: The needle will never drop completely to zero. Why the Bradex BX60? bradex bx60 battery charger instructions best
Do not leave the charger connected for excessively long periods. Follow the battery manufacturer’s recommendations for charging times.
Connect the clamp to the positive terminal of the battery. : Thermal overload protection, short circuit protection, and
It is strongly advised to disconnect the battery from the vehicle to avoid damaging the alternator. If possible, remove the battery from the vehicle entirely to prevent damage from potential acid spills.
Drop a comment below if you’ve used the BX60 on a unusual battery type. The BX60 automatically switches to float/maintenance mode
If you are storing a classic car or motorcycle for winter, do not rely on the BX60 for indefinite maintenance. Since it lacks a sophisticated float mode, leaving it connected for weeks will eventually overcharge and dry out the battery.
Battery acid is corrosive, and charging a battery can produce highly explosive hydrogen gas. Before using any battery charger, please prioritize safety.
: Detach the Black negative clip first, followed by the Red positive clip. Safety Mechanisms Exploded
Safety must always come first when working with car batteries. Follow these precise steps to safely connect, charge, and disconnect your Bradex BX60. Step 1: Pre-Charge Inspection