By02vbps Manual Jun 2026

Visually inspect the power cable before each use. If the insulation exhibits cracks or degradation, do not plug the machine in. Initial Setup & Water Supply Assembly

The motor is equipped with a thermal sensor that protects it from overloading. If the motor overheats, the unit will automatically shut down. Allow the machine to cool down for a few minutes before attempting to restart.

features a 5-foot cord with GFCI protection for wet-environment safety. Nozzle Adjustment: by02vbps manual

: Ensure your power cord insulation is completely free of cracks or weathering before plugging it in. Keep the plug connections dry and elevated off the ground.

Before starting, ensure all connections are tight and the water supply is fully on to prevent pump damage. Visually inspect the power cable before each use

Some BY02 models have alternative part numbers (e.g., WilTec 62571).

Attach your garden hose to the water inlet adapter on the machine. If the motor overheats, the unit will automatically

: Delivers a maximum pressure of 2000 PSI (up to 165 bar) with a flow rate of approximately 1.60 GPM .

This public link is valid for 7 days and shares a thread, including any personal information you added. This link or copies made by others cannot be deleted. If you share with third parties, their policies apply. Can’t copy the link right now. Try again later. High-Pressure Washer

Click your supply hose into the machine's inlet quick-connector. Ensure source water parameters do not exceed 10 bar maximum pressure and 60°C maximum temperature .