--- Epcos Power Factor Controller — Br 5016 Manual Pdf

The device can automatically detect CT polarity and system parameters during commissioning to simplify setup.

The Epcos Power Factor Controller Br 5016 offers several key features, including:

Verify that the CT is on Phase L1 and voltage inputs are connected to L2 and L3. Reverse CT polarity if necessary.

| Specification | Details | | :--- | :--- | | | BR 5000 (16-step model) | | Operating Voltage | 415 V AC (L-L) +20% to -30%, 50Hz | | Measuring Voltage | 3-phase, 3-wire: 415 V AC (L-L) +20% to -30%, 50Hz | | Measuring Current | 3 x X: 5A / X:1A selectable via terminals | | Switching Outputs | 16 relay outputs, freely programmable for 3-phase capacitors | | Switching Power | 250 V AC, 1250 VA / 150 W | | Power Consumption | < 10 VA (with max 16 relays ON) | | Target cos φ Range | 0.3 inductive ... 0.3 capacitive | | Correction/Discharge Time | Selectable from 1 sec to 600 sec | | Measurement Accuracy | Current/Voltage: 2%; Power (P, Q, S): 3% | | Interface | 1 independent isolated RS232 (with EPCOS dedicated protocol) | | Display | Illuminated LCD display, 16 × 2 lines | | Languages | English | | Enclosure / Protection | Panel-mounted (144x144x125 mm), door cutout 138x138 mm, IP41 front | | Operating Temperature | 0 … +65 °C | | Weight | 2.5 kg | --- Epcos Power Factor Controller Br 5016 Manual Pdf

Define the reactive power value (in kvar) of the smallest connected capacitor step (the base value Q1cap Q sub 1 Step 3: Selecting the Switching Time

Stores up to two months of data, including hourly records of electrical values and time-stamped fault events.

Optimal for systems with binary or progressive step sizing. The device can automatically detect CT polarity and

A preliminary draft covering feedback voltage and output command ratings is hosted by Unique Power Corporation .

Press and hold the key for a few seconds to access the programming mode. Use the arrow keys to navigate the parameters. Step 2: Critical Parameter Initialization

The Epcos Power Factor Controller Br 5016 is a microprocessor-based device designed to control and regulate power factor in low-voltage power distribution systems. The device is equipped with advanced features, including: | Specification | Details | | :--- |

What is currently showing on the display?

Slide the included mounting brackets into the side slots and tighten the screws until the unit is flush against the panel door. Electrical Connections