Felder Ad741 Manual New Exclusive

Leave a minimum clearance of 2 meters on both the infeed and outfeed sides to handle long raw lumber safely. Electrical Connections The AD 741 typically runs on a 3-phase AC supply (400V).

The cutterblock guard must always cover the unused portion of the knives. Adjust the guard height so it sits just millimeters above the workpiece, and slide it laterally so only the width of the board being planed is exposed. 4. Operating Instructions: Thicknessing Mode

Do not treat the manual as a one-time read. Keep it on your workbench. Flag the calibration pages. Highlight the torque specs. And if you ever lose it, remember that a fresh, updated PDF is just a serial number away. felder ad741 manual new

This is the most critical chapter for new owners. The machine ships bolted to a Euro-pallet.

Micro-adjustments can be made via the eccentric bedding points located underneath the cast-iron table castings. Lubrication Schedule Leave a minimum clearance of 2 meters on

Verify jointer tables or dust hood are completely closed and locked. Check E-stop.

6 m/min and 12 m/min (dual-speed synchronized gearbox) Adjust the guard height so it sits just

When you need support beyond this guide, several resources are available to help you find the information you need: