Loading...
Place the clock on a window sill or a tabletop facing towards Fort Collins, Colorado. Leave the clock undisturbed overnight. Synchronization can take anywhere from 4 minutes to 24 hours depending on atmospheric conditions. Section 3: Manual Time Setting Instructions
: Place the clock near a west-facing window overnight. It can take 3 to 12 minutes—or up to 24 hours in some conditions—to catch the signal and set the correct time. Troubleshooting Common Issues
Alternatively, remove the batteries for at least 15 minutes to let the internal capacitors drain completely, then reinsert them. Section 5: Troubleshooting and Signal Optimization kincaid radio controlled clock instruction manual
Arthur dug through a shoebox of old receipts until he found it: the instruction manual
Use the or DOWN / - buttons to adjust the flashing value. Place the clock on a window sill or
The screen will light up, display generic numbers (like 12:00), and a flashing Wave/Tower icon will appear, indicating that the clock is actively searching for the WWVB signal. Step 5: Positioning for Optimal Sync
If the clock behaves erratically, displays garbled numbers, or the hands jam, a hard reset is required. Locate the small pinhole labeled on the back panel. Section 3: Manual Time Setting Instructions : Place
: It can take anywhere from 3 to 15 minutes to catch the initial signal, but it is often more successful overnight when atmospheric interference is lower. Manual Time Setting