Kirisun Programming Software Pt8100 ~repack~ Access

Once your hardware and software are ready, connect the RJ45 end of the cable to the microphone jack on the front panel of the PT8100. Turn the radio on. Reading Data from the Radio

Check Windows Device Manager; verify cable seating; select correct COM port in software.

Ensure the radio is powered by a stable 13.8V bench supply, not a weak battery source.

In the Kirisun software menu, click on > Communication Port . kirisun programming software pt8100

Run the setup executable file for the Kirisun PT8100 programming software. Follow the on-screen prompts to complete the installation, then launch the program. 4. Configure Communication Settings Within the Kirisun software menu: Click on or Communication Setup .

Look under . If a yellow warning triangle appears next to your device, you must install the driver manually.

Download the verified Kirisun PT8100 programming software executable. Extract the ZIP or RAR archive to a local folder. Right-click on Setup.exe and select . Once your hardware and software are ready, connect

The radio will typically reboot automatically once the write process finishes successfully.

: The software can program specific codes for Remote Kill, Stun, Activate, and Revive , allowing dispatchers to disable or reactivate radios over the air. Advanced Customization

Are you setting up or connecting to a repeater network ? Ensure the radio is powered by a stable 13

The PT8100 CPS is from Kirisun’s main website – it is distributed via:

The Kirisun Programming Software PT8100 boasts an impressive array of features that make it an attractive choice for programmers and developers. Some of the key features include: