Lighthouse-tx-htc-2-0-calibration-rescue-244.bin

If the light turns or steady white , the rescue was successful. 5. Re-flash Official Firmware (Crucial)

The light should turn green (or cycle through colors). The station is now recovered, and you can try updating the firmware normally through SteamVR. Troubleshooting the Rescue Process

If the file is missing from your local directory due to a recent Steam update, you can acquire it by opting into the "SteamVR Beta" branch via your Steam library properties, which re-downloads legacy hardware recovery tools. 2. Trigger CRP Disabld Bootloader Mode

This specific binary configuration file is the primary software fix used by the VR community to rescue HTC-manufactured SteamVR Base Stations 2.0 (often identified by their curved front face) when they get stuck in a "Red Blinking Light" error state. lighthouse-tx-htc-2-0-calibration-rescue-244.bin

Take your downloaded lighthouse-tx-htc-2-0-calibration-rescue-244.bin file and copy it directly onto the CRP DISABLD drive.

I can provide the exact file directories or alternative recovery scripts for your specific hardware batch. Share public link

If you complete the steps above and the base station immediately reverts to flashing red, your issue is likely . If the light turns or steady white ,

Locate or download the correct rescue binaries. These are typically packaged within your local SteamVR directory, located by default at: C:\Program Files (x86)\Steam\steamapps\common\SteamVR\tools\lighthouse\firmware\vrc_tracker\ or ...\lighthouse\firmware\htc\

Inside, you will see a file named firmware.bin . Backup any existing files on this drive to a safe folder on your PC just in case. Step 3: Flash the Rescue Firmware

Press and the Channel/Mode button on the back of the base station. The station is now recovered, and you can

Provide instructions on in the future.

Release the button once your PC detects a new removable drive named CRP DISABLD Apply the Rescue Firmware Open the "CRP DISABLD" drive and delete the existing firmware.bin lighthouse-tx-htc-2-0-calibration-rescue-244.bin file into the drive.

Unplug the Micro-USB cable from both the PC and the base station. Plug the original power adapter back into the base station.

This file is intended to restore the base station's ability to accept a standard firmware update through SteamVR. Once the rescue file is applied and the unit boots, you should immediately perform a "Recover Firmware" or update via the SteamVR status window. Are you currently seeing a blinking red light on your base station, or is it failing to appear in