Drastically reduces the likelihood of the operating system freezing while loading applications. Aptoide App Center Enhancements:
Unzip the download package on a computer to isolate the file named update.bin .
Version (often labeled in update files as MstarUpgrade.bin) is designed to address performance issues found in earlier versions. Key Benefits of Updating to v203
: The firmware binaries compiled for v2.03 cannot be deployed on the ViewSonic M1+_G2 , M1+_V , or M1+-2 variations. m1 firmware update v203 upd
After reaching 100%, the projector will restart automatically. It will load the ViewSonic splash screen to complete the update. Troubleshooting the M1+ v203 Update
The v2.03 firmware optimises power management and energy efficiency to comply with Energy Star standards. It does add new scanning features; rather, it is a maintenance release for compatibility with the revised main board hardware. If your scanner falls within the listed serial number ranges and you have not yet applied v2.03, Canon recommends doing so to ensure full hardware compatibility and stable operation.
A USB drive formatted to FAT32 . (Note: NTFS or exFAT formatted drives may not be recognized by the projector). Drastically reduces the likelihood of the operating system
After downloading the zip file, unzip the folder. You will likely see files named MstarUpgrade.bin and M1+WW.bin (or similar).
: Let the entire reboot cycle process naturally. Post-update boot processes frequently run background hardware indexing scripts, making initial load times take several minutes longer than standard startups. Troubleshooting Update Errors
: If the update notification does not appear automatically, verify that the USB drive is formatted correctly to FAT32 and that the files are in the root directory rather than inside a folder. Power Stability Key Benefits of Updating to v203 : The
After the progress bar reaches 100%, the projector will restart and return to the ViewSonic startup screen.
Leave your Mac plugged into power to allow it to apply the firmware update during the restart process.
Connect your laptop to the M1 base station via Wi-Fi (default password: 12345678 ) or an Ethernet cable.