Decoder __link__ — Micron Memory Part Number

Micron structures its part numbers into distinct logical blocks. While the exact meaning of each position shifts slightly between DRAM, LPDDR, and NAND, the fundamental blueprint remains consistent.

Micron NAND Flash part numbers (found in SSDs, smartphones, and embedded devices) use a slightly different structure, such as . 1. Core Flash Prefix (MT29F) MT29F : Denotes Micron NAND Flash memory. 2. Density (128G)

Identifies whether the drive utilizes SLC (Single-Level Cell), MLC, TLC, or QLC (Quad-Level Cell). This tells you the endurance and write-lifecycle expectations of the drive.

: Decodes prefixes like MT40A (DDR4) or MT60B (DDR5) and suffix details for density, configuration, and speed. micron memory part number decoder

0.625ns clock cycle, which translates to DDR4-3200 speeds with optimized CL22 latency. -075: Corresponding to DDR4-2666 data rates.

Decodes whether the drive is a standard 2.5-inch SATA drive, an M.2 2280 stick, or an enterprise U.2/U.3 drive.

A typical Micron part number (MPN) usually follows this flow: Micron structures its part numbers into distinct logical

: The interface is straightforward—you simply enter the 5-digit code found on the chip (usually preceded by an "MT" mark) to get immediate results. : Using the official Micron FBGA Part Decoder

Let us dissect the DRAM example:

For DDR5, you’ll see -40 (DDR5-4000), -48 (DDR5-4800), or -62 (DDR5-6200). Density (128G) Identifies whether the drive utilizes SLC

[MT] [40] [A] [1G8] [SA] - [062E] : [E] | | | | | | | 1 2 3 4 5 6 7 1. Brand Identifier

Always cross-reference your decoded guess with the official Micron datasheet. That said, the standard configuration follows a reliable pattern.