Mikrotik L2tp Server Setup Full ~upd~

To configure the L2TP server, navigate to and click on the L2TP tab. Click the + button to create a new L2TP server configuration.

To begin the setup process, access your Mikrotik router using the Winbox configuration tool or the web-based interface.

: Use use-encryption=yes to ensure traffic is secured. 3. Create VPN Users (Secrets) Each user requires unique credentials to connect. Winbox : Go to PPP > Secrets . mikrotik l2tp server setup full

# Check active L2TP interfaces /interface l2tp-server server print

Optional: If you want to allow VPN users to access the internet through the router, ensure NAT is configured (usually covered by a default masquerade rule). Move these rules to the top of your filter list. Step 7: Testing the Connection On a remote device (e.g., Windows 10/11): Go to -> Add a VPN connection . VPN Provider : Windows (built-in). Connection Name : HomeVPN . Server name or address : Your router's Public IP. VPN Type : L2TP/IPsec with pre-shared key. Pre-shared key : MySuperSecretKey (Set in Step 4). To configure the L2TP server, navigate to and

If you want to configure client devices, most modern operating systems (Windows, macOS, iOS) have built-in L2TP/IPsec clients. Simply enter your MikroTik public IP, choose , enter the IPsec secret, and input the user credentials created in Step 4.

A MikroTik router with a public IP address (static IP is preferred, but Dynamic DNS can be used). Winbox or WebFig access. RouterOS version 6 or 7. Step 1: Create an IP Address Pool : Use use-encryption=yes to ensure traffic is secured

Navigate to from the main menu and select the Profiles tab. Click the + button to create a new profile. In the General tab: Name : l2tp-profile