The most crucial file. It acts as a map that guides the flashing tool on where to partition and inject the various image files into the device's eMMC storage.
Open Flash_tool.exe . Click on the button next to the "Scatter-loading File" section. Navigate to your firmware folder and select the file ending in _Android_scatter.txt . Step 3: Select Flashing Mode In the drop-down menu, you will see options like: Download Only: Best for standard repairs (Recommended).
Use this when upgrading to a fundamentally different version of Android (e.g., Lollipop to Marshmallow). mt6735 flash file
I can provide the exact scatter settings or troubleshooting steps for your setup.
Indicates the active flashing process of the actual Android system files. Step 8: Finalizing Installation The most crucial file
Right-click the driver setup file and select to complete installation. Restart the computer to initialize the driver subsystem. Step 2: Extract Firmware and Tools
Are you trying to with an MT6735 chip, or are you trying to program an E-Ink display device? Click on the button next to the "Scatter-loading
| Error Code / Message | Likely Cause | Solution | |---|---|---| | STATUS_BROM_CMD_SEND_DA_FAIL (0xC0060003) | Driver issues, USB connection, or incorrect Download‑Agent. | Check your USB cable and port; reinstall MediaTek USB VCOM drivers; manually select the correct DA file in SP Flash Tool (usually MTK_AllInOne_DA.bin ); ensure the device is powered off completely before connecting. | | S_BROM_CMD_STARTCMD_FAIL | The device does not enter preloader mode correctly. | Force the device into preloader mode by holding Volume Up or Volume Down while connecting the USB cable; try a different USB port (preferably USB 2.0); remove and reinsert the battery if possible. | | S_DL_GET_DRAM_SETTING_FAIL (0x13BE) | Incompatible firmware or corrupted preloader. | Verify that the firmware is exactly for your device model; try a different firmware version; if the preloader is corrupted, you may need to use hardware flashing tools (JTAG, Easy JTAG). | | S_FT_ENABLE_DRAM_FAIL (0xFC0) | Memory configuration mismatch. | The scatter file does not match the device's actual eMMC layout. Extract the scatter file from a working backup of your own device and use it instead. | | NAND Flash not found / not detected | The device is not recognized at all. | Reinstall USB VCOM drivers; ensure the device is powered off; try a different USB cable; restart SP Flash Tool and run as administrator. | | S_DL_PMT_ERR_NO_SPACE (0x13C8) | The firmware is larger than the available partition space. | You may have selected “Download Only” after a partial flash; try “Firmware Upgrade” or “Format All + Download” to repartition the flash memory. | | Preloader signature authentication failed | The device requires an authenticated preloader. | Some newer MT6735 devices (or those with recent security patches) implement authentication. You will need a custom DA file or a patched SP Flash Tool version that bypasses authentication. |
The layout of the layout partitions in the new firmware file does not match the existing partition structure currently written on the phone's internal memory chip.
The specific stock ROM matching your device brand and model. Step-by-Step Installation Guide Using SP Flash Tool
Click the green button at the top of the SP Flash Tool interface. The tool will now go into a standby state, waiting for the device to connect. Turn off your MT6735 smartphone completely.