Simco Fmx002 Manual |best| Full Jun 2026

Clean with dry compressed air. If error persists, factory service is required. Low battery voltage. Replace the 9V manganese battery. Unstable or fluctuating readings

The SIMCO FMX-002 stands out for its precision and ease of use. Equipped with a built-in microprocessor, it ensures accurate measurements while remaining light and portable. Its anti-static material housing and a grounding buckle provide reliable results even in sensitive ESD work areas. Whether you’re auditing a workstation or troubleshooting an ionizer, the FMX-002 delivers reliable data. For safety and device longevity, always operate within the specified environmental conditions: a temperature range of 10°C to 40°C and relative humidity below 60%.

If you own an FMX-002, the is your Rosetta Stone. If you own a newer unit, search specifically for that model number. simco fmx002 manual full

| Parameter | Value | |-----------|-------| | Measurement Range | 0 to ±22.0 kV (1 kV = 1000V) | | Distance to Target | 25 mm (1 inch) — fixed, using built-in spacers | | Accuracy | ±5% of reading ±2 digits | | Response Time | < 1 second | | Operating Mode | Continuous, peak hold, or average | | Power | 9V alkaline battery (6LR61/6F22) | | Auto Power Off | After 5 minutes of inactivity | | Dimensions | 130 x 70 x 28 mm | | Weight | ~ 230 g (including battery) |

: Use the two integrated LED guide lights; when the beams converge into a single concentric circle on the surface, you are at the correct distance. Clean with dry compressed air

: Hold the meter exactly 1 inch (25mm) away from the target object.

A: While the meter can function without it, the ground wire is essential for the most accurate and stable readings, especially in electrically noisy environments. Replace the 9V manganese battery

Indicates a faulty sensor sensor mechanism or physical damage to the internal tuning fork chopper. 5. Calibration and Verification Standards