The V2000-C RFID access control system comes with a range of features that make it an ideal solution for access control. Some of the key features include:
Verify the input voltage is a steady 12V DC.
Connect one wire of the push button to the (or PUSH ) terminal.
Fix the back cover firmly to the wall using the provided wall plugs and screws. Thread the cable through the cable hole. Attach the keypad to the back cover and secure it. Terminal Wiring Identification Wire Color Label / Function Description Positive 12V DC Power Input Black Negative Ground Power Input Green Wiegand Output/Input Data 0 White Wiegand Output/Input Data 1 Yellow Exit Button Connection (Triggers Ground) Blue Relay Normally Open Contact Purple Relay Common Contact Orange Relay Normally Closed Contact Grey Alarm Output Negative (-) Brown Doorbell Button Connection Wiring for Common Lock Types Fail-Safe Lock (e.g., Magnetic Lock / Dropbolt) V2000-c Rfid Access Control User Manual
Press 0000 + # . (Note: This clears all cards and PINs but retains the master code). Setting the Door Release Interlocking Time
The is a standalone RFID access control reader with an integrated keypad. It supports:
Connects to the Power Supply control/ground line or loops to 12V depending on lock type OPEN (Exit Button) The V2000-C RFID access control system comes with
In programming mode, press 1 + Slot ID (e.g., 001 to 999) + # + Swipe Card + # .
The V2000-c provides a practical, cost-effective entry solution for many installations. With correct installation, strict admin practices, and routine maintenance, it will deliver reliable daily operation and straightforward auditing. Balance convenience and security by using encrypted channels and two-factor methods where possible, and always comply with local egress and fire safety regulations.
Are you using an or a simple 12V adapter? Fix the back cover firmly to the wall
Turn off the power supply. Press and hold the # key or the exit button loop while restoring power. Hold for 3 to 5 seconds until you hear a series of short beeps. The programming code will revert to the factory default ( 9999 ). User card data will not be erased during this hardware reset.
The V2000-C RFID Access Control System is a cutting-edge solution designed to provide secure and convenient access control for various applications, including office buildings, schools, hospitals, and more. The system utilizes RFID technology to grant authorized individuals access to designated areas, while preventing unauthorized entry.
Features an anti-tamper alarm and built-in buzzer. 2. Technical Specifications Operating Voltage: 12V DC (usually 12V-24V DC or AC) Card Type: 125kHz EM RFID Card/Fob Reading Distance: 3-6 cm Lock Output Load: Max 3 Amp Environment: -20°C to 60°C (-4°F to 140°F) 3. Installation Guide (V2000-c)
Press 0 + New Master Code + # + Confirm New Master Code + # . Note: The Master Code must be 6 digits long. Set Access Mode (Entry Options) You can choose how users gain entry to the building: Press 1 + 0 + # Card OR PIN (Default): Press 1 + 1 + # Card + PIN Combination: Press 1 + 2 + # Set Relay Strike (Unlock) Time Enter Programming Mode.